Sunday, June 24, 2012

3m filtrete thermostat Owner manual

3m filtrete thermostat Owner manual 1. The thermostat is flush mount, a back box of 35mm should have been sunk in the wall prior to installation. 2. The thermostat should be mounted at around 6ft or eye level.
3. Do not install near a direct heat source.
Step 1 Carefully separate the front half of the thermostat from the back plate by placing a small flat head terminal driver in to the slots on the bottom face of the thermostat.
Step 2
Carefully unplug the ribbon connector which is plugged in to the front half of the thermostat.
Place the thermostat front half somewhere safe. Terminate the thermostat as shown in the
diagrams at the back of this booklet. Screw the thermostat back plate on to the back
box. for complete detail maybe you download the 3m filtrete thermostat Owner manual PDF here
 this manual already covered too by michael blog, but if we have a diferent thing